Agriculture is a vast field. Every human has to consume food in order to live. These food items are got only from the hardship of a farmer. As the technology improves many modern methods have evolved to sophisticate all including the farmers . Most of these focused only on reduction of burden on the farmer and not on the improvement of farming. One step was taken to provide optimized resource utilization in the agriculture field. The new invention and the one which takes care of this optimizing step is the drip irrigation process. Many are not aware of the drip irrigation process. Some of them are stubborn and are not ready to go in for another process. They feel safe and secure with the conventional process.
Why we have to go in for Drip irrigation?
As we all no water scarcity is the most faced problem around the globe. Not sufficient amount of water is present with many villages and their crops get spoiled due to it. So saving of water is a must for all of us. This can be easily achieved by the use of drip irrigation process instead of the conventional process. The wastage of water can be drastically reduced when drip irrigation is followed. The working principle of drip irrigation process is very simple and uses small openings in the hose to water the plant. The holes are so small that only drops of water emerge from these holes. So the water usage rate is so minimum and this is even smaller than the water intake rate of the plants. So the wastage of water is minimal and the utilization of water is optimum. The type of hoses used for this process is the soaker hose. This hose has minute holes of 1/6 to 1/4 inch diameter. And this is also has unique capability to work both on the surface and under the surface. The most important thing that is to be mentioned here is about the fittings.
Fittings in the drip irrigation process:
Water leakage and water loss in the fitting is the major loss in the case of any hose usage. The wear and tear is mostly felt at the fitting region. This can be reduced drastically if the special fittings are provided. The fittings used in the drip irrigation process is one of its kind. The fittings are more precisely manufactured and they form a tight fit. The clearance in between the threads are so minimum. The material these fittings are made up of is the brass. In addition to it hoses also posses this capability to fit perfectly with any pipes.
Agricultural Biodiversity 
Leave a comment